Skip to main content
Knowledge Base

Does the SD card slot on the ADC-V723/723X have any functionality?

  1. Last updated
  2. Save as PDF

Yes. An SD card can be inserted into the ADC-V723/723X so that it can record continuously without additional hardware. The ADC-V723/723X must have a service package that supports Onboard Recording. For more information, see Onboard Recording with Smart View for video devices.

To install an SD card in an ADC-V723/723X:

Install SD card ADC-V723.png

  1. It is recommended to insert the micro SD card before the camera is mounted to minimize the chance of dropping the card. If the camera is mounted, remove the camera in order to more easily access the SD card slot.
  2. Unscrew the 2 screws on either side of the door found on the bottom face of the camera near the QR code and MAC address.
  3. Carefully lift then rotate the door open to provide clearance for inserting the card into the slot for the SD card. Take care not to tug the door which could separate it from the camera.
  4. Insert the micro SD card until it clicks.
  5. Replace the door and screw the 2 screws back firmly into place.

To create an Onboard Recording rule

Note: This rule may automatically be created during camera installation if an SD card is detected in the camera.

  1. Verify that the SD card is inserted into the camera.
  2. Log in to the Alarm.com customer website.
  3. Click Video.
  4. Click Recording Rules.
  5. Click Local Recordings.
  6. Click Add New Schedule.
  7. Click Onboard.
  8. Using the Record from this camera dropdown menu, select the desired device.
  9. Using the Recording quality slider, select the desired quality.
  10. In Time Frame, click to select either At all times or Only during the following times.
    • If Only during the following times is selected:
      1. Click to select the desired days to record.
      2. Using the Starting at and Ending at dropdown menus, select the time period to record in hours.
  11. For additional configuration options, click to expand Advanced Options.
    • To limit the number of days that recordings are kept:
      1. Click the Retention Time toggle switch to enable a limit.
      2. Using the dropdown menu, select the desired number of days to limit the recordings to.
  12. Click Save.
  1. Verify that the SD card is inserted into the camera.
  2. Log in to the Alarm.com app.
  3. Tap Video .
  4. Tap Configure.
  5. Tap Recording Rules.
  6. Tap Local.
  7. Tap Add.
  8. Tap Onboard if there are multiple options to choose from.
  9. Using the Record from this camera dropdown menu, select the desired device.
  10. Using the Recording Quality slider, select the desired quality.
  11. In Time Frame, click to select either At all times or Only during the following times.
    • If Only during the following times is selected:
      1. Tap to select the desired days to record.
      2. Using the Starting at and Ending at dropdown menus, select the time period to record in hours.
  12. For additional configuration options, click to expand Advanced Options.
    • To limit the number of days that recordings are kept:
      1. Tap the Retention Time toggle switch to enable a limit.
      2. Using the dropdown menu, select the desired number of days to limit the recordings to.
  13. Tap Save.