Skip to main content
Knowledge Base

Enable or disable motion-detected wake on an Alarm.com Smart Thermostat

  1. Last updated
  2. Save as PDF

This setting will enable the Smart Thermostat (ADC-T40K-HD, ADC-T3000) screen to wake when motion is detected nearby.

Note: This feature is only available if the thermostat is AC-powered.

Enable or disable motion-detected wake on an Alarm.com Smart Thermostat (ADC-T40K-HD, ADC-T3000)

Note: This option does not appear if thermostat configuration is not enabled for customers.

  1. Log in to the Alarm.com customer website.
  2. In the Thermostats card, click Details.
  3. Click Advanced Configuration.
  4. Click User.
  5. In Motion Sensor, click Enabled or Disabled.
  6. Click Save. 
  1. Tap the touchscreen.
  2. Tap More.
  3. Tap User Settings.
  4. Tap Motion Sensor.
  5. Tap Enable or Disable.
  6. Tap Save.
To calibrate motion on the ADC-T40K-HD locally: 
  1. Tap the touchscreen.
  2. Tap More.
  3. Tap Installer Settings. 
  4. When the warning appears, tap OK.
  5. Tap Advanced Configurations.
  6. Tap Calibrate Motion.
  7. Press Calibrate and follow the on-screen instructions. 
  1. Press the Minus button.
  2. Select SETTINGS.
  3. Select USER.
  4. Select MOTION.
  5. Select ON or OFF.