Skip to main content
Knowledge Base

SEM-DSC PowerSeries Dual-Path (SEM300) - Data Sheet

  1. Last updated
  2. Save as PDF

Alarm.com System Enhancement Module (SEM) is the most cost-effective and comprehensive solution for migrating compatible DSC PowerSeries™ PC1616, PC1832, and PC1864 panels to Alarm.com's award-winning interactive services. The Dual-Path SEM supports the 4G LTE cellular network and optional Broadband Ethernet. This ensures the longest life cycle with the most secure and reliable service.

For information about installing the SEM300 for DSC PowerSeries, see SEM-DSC PowerSeries Dual-Path (SEM300) - Installation Guide. 

SEM 300 front image.PNG

Features

  • Fast, reliable, & secure wireless signaling
  • Home automation & energy management
  • Support for Z-Wave Plus devices
  • Video monitoring
  • No separate power supply needed
  • Over the air (OTA) upgrades
  • CID and SIA central station signaling
  • Internal antennas
  • Cover & wall tamper included
  • Externally facing LEDs for visual feedback
  • Broadband as an optional secondary communication path
  • Remote monitoring & control via web/mobile
  • Remote panel configurations with Uploader/Downloader, including Add Sensors
  • Remote access and management of locally saved user codes

Note: The Cat-M variant (indicated by the ME910 Telit radio) only requires the primary antenna. 

Benefits

  • Enable wireless reporting of alarms and other system events using the LTE wireless (cellular) network and Broadband Ethernet
  • Enable Alarm.com interactive monitoring and alerting for end users
  • Integrate Alarm.com's home automation and energy management services with the SEM's built-in Z-Wave Plus capabilities
  • Integrate Alarm.com's home automation and energy management services with the SEM's built-in Z-Wave Plus capabilities

Specifications

Power requirements 7-14 V, 13.6 V nominal
125 mA nominal (continuous), 230 mA max
Cellular network

4G LTE with 3G HSPA, 2G GSM fallback

Note: Cat-M uses the 4G LTE Cat-M1 network, no fallback
Panel interfaces Two keypad BUS connections, 12 V power and ground
Enclosure indicators Five LEDs (red, green, yellow, or blue)
Operating temperature 14 to 131°F (-10 to 55°C)
Storage temperature -30 to 140°F (-34.4 to 60°C)
Humidity 90% relative humidity non-condensing
Enclosure dimensions (L x W x D) 7.66 x 4.35 x 1.65 in. (19.46 x 11.05 x 4.19 cm)
Enclosure color White 
Case material Fire-retardant PC/ABS, PC