SEM-DSC PowerSeries - SEM Firmware Revision History
- Last updated
-
-
Save as PDF
The following tables outline descriptions of firmware revisions for the SEM-DSC PowerSeries.
Note: All current versions support everything on previous versions.
| Firmware version |
Details of updates |
|
2.72
|
- Available on 1/13/2025.
- Includes zone mapping improvements.
- Available to send to module version 189b+ and gateway version 2.51+.
- Module version 191c.
|
|
2.71
|
- Available on 5/17/2023.
- Not available as an OTA upgrade.
- Module version 191b.
|
|
2.70
|
- Released 4/2022.
- First version of SEM 300 for DSC PowerSeries.
- Not available as an OTA upgrade.
- Module version 191a.
- Includes enclosure tamper reporting.
- External facing LEDs.
- Includes zone mapping improvements.
|
|
2.62
|
- Released 12/20/21.
- General maintenance to resolve minor installation issues.
- Improved individual sensor bypass event reporting.
- Resolved sensor names defaulting after a remote firmware upgrade.
- Fixed the end of the keypad lockout event reporting.
- Improved peripheral device trouble (i.e., tamper, supervision loss, AC failure, etc) event reporting.
|
Previous firmware versions
| Firmware version |
Details of updates |
|
2.60
|
- Released 7/13/20.
- Support for adding and viewing keyfobs remotely.
- Support for the PC5320 Multiple Wireless Reciever Module.
- Support for PC1616/PC1832/PC1864 panel version 4.62 and keypad version 4.62
- Ability to view wireless serial numbers.
- Update to Zone Scan order:
- Performing version Scan
- Performing user and zone scan
- Set Time
|
|
2.53
|
- Released 12/2019.
- Contains user code improvements.
|
|
2.52
|
- Released 10/21/19.
- Adds support for Periodic Test with Trouble (E608), General System Supervisory Trouble/Restore (E/R330), and System Tamper/Restore (E/R145) panel events. Resolves issues with silent panic restore and armed night system status.
|
|
2.51
|
- Released 8/19/19.
- Adds support for Swinger Shutdown settings programmed at the panel, Selective Sensor Bypass from the Alarm.com mobile app and broadband communication test from the DSC keypad.
|
|
2.39
|
- Released 12/2018.
- Preparation for new SEM hardware and expanded features in the future.
- Contained a hardware change and a new module version.
- Not available as an OTA upgrade.
|
|
2.38
|
- Released 6/2020.
- Available internationally only with small carrier updates for international modules.
- Existing modules cannot be OTA'd higher than 2.38 due to the hardware changes in 2.39
|
|
2.37
|
- Released 6/2018.
- Improved zone scan experience for 1832 panels (revision 4.2X).
|
|
2.36
|
- Released 5/2018 for X10 gateway version.
- Improved zone scan experience for 1832 panels (revision 4.2X).
|
|
2.32/2.34
|
- Released 3/2018.
- 2.32 and 2.34 have the same feature set. However, 2.32 is an OTA, and 2.34 featured a small hardware change.
- Includes user code improvements.
|
|
2.31
|
- Released 11/2017.
- Available for all 185+ modules.
- Improvements for user codes and Z-Wave.
- Reduces the time the panel displays System Unavailable on the DSC keypad.
|
|
2.30
|
- Released 8/2017.
- The SEM now supports dual-path broadband connections via Ethernet.
- Contains support for Quick Exit with no entry delay.
|
|
2.22
|
- Released 5/2017.
- Allows quick arming to be enabled or disabled to allow the SEM to arm the system remotely.
- Allows support for Quick Exit.
- Quick Exit with No Entry Delay is not supported with this firmware.
|
|
2.20
|
- Released 5/2017.
- This was the first release version of the SEM-DSC PowerSeries.
- Quick Arm has to be enabled on this firmware version, and Quick Exit cannot be used.
|
|
2.04
|
- This was the pre-release (beta) version of the SEM-DSC PowerSeries.
- If an account is on this firmware, upgrade as the first troubleshooting step.
|
