Which versions of control panels are compatible with Alarm.com modules?
The following table outlines what panel/module firmware versions Alarm.com-compatible panels require to support Alarm.com and LTE networks.
Additional panels may also be compatible with limited interactive abilities using the Alarm.com Universal Communicator (AUC). For more information, see Which control panels are compatible with Alarm.com Universal Communicators?.
| Panel | Alarm.com compatibility requirements | LTE compatibility requirements |
|---|---|---|
| 2GIG EDGE | All versions (Panel firmware version begins at 1.0) | All versions |
| 2GIG GC Touch | All versions | All versions |
| 2GIG GoControl | All versions |
|
| 2GIG GC2e | All versions (Panel firmware version begins at 1.21) |
|
| 2GIG GC3 | All versions |
|
| 2GIG GC3e | All versions (Panel firmware version begins at 3.2.1) | No additional requirements |
| DSC Impassa |
Panel firmware version 1.3+ |
No additional requirements |
| DSC PowerSeries for the System Enhancement Module (SEM) | Panel versions PC1616, PC1832, and PC1864 with firmware version 4.2+ | No additional requirements |
| DSC PowerSeries Neo | Panel versions HS2128, HS2064, HS2032, HS2016 with firmware version 1.11+ | No additional requirements |
| DSC PowerSeries Pro |
Module firmware version 189a+ Panel firmware version 1.01+ Note: Panel firmware version 1.10 requires module firmware version 189d+ |
No additional requirements |
| DSC Touch | All versions | Not compatible with LTE |
| Honeywell/ADEMCO Vista for the System Enhancement Module (SEM) |
Panel versions 10P, 15P, 20P, 21iP and variants, manufactured 2005 or later and firmware version 3.1+ For a full compatibility list, see SEM-Honeywell/ADEMCO Vista Installation Guide - SEM Panel Compatibility. |
No additional requirements |
| Interlogix Concord |
Panel firmware version 4.0+ |
No additional requirements |
| Interlogix NetworX (NX) | Panel versions 4 (v2), 6 (v2), 8 (v2), 8E | No additional requirements |
| Interlogix Simon XT | Panel firmware version 1.2+ | Panel firmware version 1.3+ |
| Interlogix Simon XTi | All versions | No additional requirements |
| Interlogix Simon XTi-5 | All versions | No additional requirements |
| Interlogix Simon XTi-5i | Module firmware version 191c+ | No additional requirements |
| Qolsys IQ Panel | All versions | Not compatible with LTE |
| Qolsys IQ Panel 2 / IQ Panel 2 Plus | Panel firmware version 2.0.3+ | No additional requirements |