Skip to main content
Knowledge Base

DSC Impassa CDMA Module - Data Sheet

Overview

The Impassa CDMA Module from Alarm.com brings Alarm.com's secure wireless signaling, real-time notification and web-based remote monitoring and control capabilities to the DSC Impassa panel. Its digital wireless communication via CDMA enables secure alarm reporting to any central station via SIA or Contact ID, regardless of whether a phone line is installed at the system location. 

  • Secure Wireless Signaling via CDMA
  • No phone line required (VoIP Compatible)
  • Remotely programmable via Alarm.com's Remote Toolkit
  • Enables Alarm.com interactive monitoring and alerting for end users
  • Supports two-way voice over CDMA
  • Integrated support for Alarm.com emPower™ home automation and energy management platform
  • Compatible with Alarm.com Image Sensor (additional hardware required)

Features

Fast, Reliable & Secure Wireless Signaling

The Alarm.com CDMA Module for Impassa can be used as the primary means of communication (no phone line needed) or as a backup to a landline phone connection.

No Separate Power Supply Needed

The Alarm.com CDMA Module does not require its own battery or transformer. It runs on the control panel's AC power and backup battery sources and can function reliably for more than 24 hours during a power outage.

Remote Monitoring & Control via Web/Mobile

Operation of the Impassa system from the Alarm.com web and mobile interface is simple and allows system access at any time, from any location. Web features from Alarm.com include viewing system status and history, arming and disarming the system, setting up and managing user codes, and creating customized e-mail and text message notifications for any type of alarm or non-alarm activity at the property.

Expansive Coverage Footprint

Alarm.com's CDMA services are available throughout the United States on Verizon's reliable nationwide network.

Two-Way Voice over CDMA

The CDMA Module with Alarm.com's patented digital two-way voice technology gives customers additional security and peace of mind by allowing a central station operator to speak to occupants and listen-in on premise activity during alarm events directly through the control panel— even without a landline connection.

emPower™ Home Automation & Energy Management

Alarm.com's emPower™ solution, supported on the CDMA Module, offers feature-rich home automation and energy management services built on our proven, interactive platform, allowing remote control of Z-Wave devices through the web/mobile interfaces.

Innovation in Motion with Alarm.com's Image Sensor

The Alarm.com Image Sensor combines a wireless PIR (Passive Infrared) motion sensor, an integrated still camera, completely wireless communication, and Alarm.com Interactive Services to deliver better security through visual verification of alarms and increased engagement through on-demand property views. The Image Sensor is compatible with the CDMA Module when the Image Sensor daughterboard (sold separately) is connected.

Easy-to-Read Diagnostics

The Alarm.com CDMA Module diagnostic LEDs and supplementary troubleshooting menus on the panel allow installers to monitor the connection between the control panel and the module, and between the module and the CDMA cellular network. The LEDs also indicate CDMA signal strength, which is useful when choosing the best location for the CDMA Module and antenna installation.

Specifications

Compatibility Impassa panels with software versions 1.3+
Power Requirements 3.9v, 60mA standby current without Image Sensor daughterboad (5mA PowerSave mode), 84mA standby current with Image Sensor daughterboad (10mA PowerSave mode), 1A peak current
Cellular Network Dual Band CDMA/1xRTT (3G)
Operating Temperature 14 to 131°F (-10 to 55°C)
Storage Temperature -30 to 140°F (-34 to 60°C)
Humidity 90% non-condensing
Dimensions (H x W) 3.25 x 4.25 in. (8.23 x 10.80 cm.)
Listings FCC Part 15, IC, PTCRB Verizon Certified
Carrier Options Verizon