Interact with a Z-Wave device from a 2GIG GC3
The 2GIG GC3 panel allows users to interact with Z-Wave lights, locks, thermostats, and garage devices locally at the panel. For information on adding Z-Wave devices, see Manage Z-Wave devices on a 2GIG GC3.
Note: Additional Z-Wave devices may be able to be added and controlled locally. For more information, refer to the device manufacturer.
To interact with Z-Wave lights from a 2GIG GC3:
- Tap Smart Home Controls.
- Enter a user code.
- Tap Lights.
- Tap the toggle switch in the row with each light to turn the light on or off.
To interact with Z-Wave locks from a 2GIG GC3:
- Tap Smart Home Controls.
- Enter a user code.
- Tap Locks.
- Tap the toggle switch in the row with each lock to lock or unlock the door.
To interact with Z-Wave thermostats from a 2GIG GC3:
- Tap Smart Home Controls.
- Enter a user code.
- Tap Thermostats.
- Tap the arrows to adjust the temperature setpoint.
- Tap to set the fan to Auto or On.
- Tap to set the mode to Off, Heat, Cool, or Auto.
To interact with Z-Wave garage devices from a 2GIG GC3:
Important: Interaction with the Linear Z-Wave Garage Controller GD00Z-4 requires a 2GIG GC3 firmware version 3.0.2+.
- Tap Smart Home Controls.
- Enter a user code.
- Tap Garage Doors.
- Tap the garage door toggle switch to open or close the garage door.
- When green, the garage door is open.
- When red, the garage door is closed.