Yale Real Living Key Free Touchscreen Deadbolt with Z-Wave Plus (YRD156)

To place the lock in Enroll Mode:

1. Place the Z-Wave controller into Add Mode.
2. Remove the battery cover.
3. Press the  button and hold until unit beeps two (2) times.
4. Release the button and network joining automatically begins.
5. Replace the battery cover.

To place the lock in Delete Mode:

1. Place the Z-Wave controller into Delete Mode.
2. Remove the battery cover.
3. Press the  button and hold until unit beeps five (5) times.
4. Release the button and network removal automatically begins.
5. Replace the battery cover.

When the lock is reset to factory defaults, all user codes (including the Master PIN code) are deleted and all programming features are reset to original default settings.

1. Remove the battery cover.
2. Remove the batteries.
3. While pressing the reset button (minimum of 3 seconds) reinstall batteries. Release the reset button.
4. Replace the battery cover.

Upon reset, master code creation is the only option available and must be performed prior to any other programming of the lock.

After setting the master code, press any key to complete handing of the lock.