Yale Assure SL Key Free Touchscreen Deadbolt (YRD652)

Device Image
Manufacturer	Yale
User Code Limit	250
Digits in User Code	4-8
Keypad Layout	1 number per key
Auto Re-Lock Option	Yes
Removable Z-Wave Card	Yes
Z-Wave Security 2 (S2)	Yes (700 Series only)
Z-Wave SmartStart	Yes (700 Series only)
Z-Wave Enrollment	For 500 Series locks, or if the Z-Wave controller is not SmartStart or S2-compatible, this device can be enrolled in the traditional way as an S0 device. Place the Z-Wave Controller into Add Mode. Enter the master code, followed by [⚙]. Press [7], followed by [⚙]. Press [1], followed by [⚙].
Factory Reset	Caution: When the lock is reset to factory defaults, all user codes (including the Master code*) are deleted and all PIN programming features are reset to original default settings (see below). Remove the battery cover and batteries. Remove the interior escutcheon to access the reset button. The reset button is located beside the PCB cable connector. While pressing the reset button (minimum of 3 seconds) reinstall batteries. Release reset button. Replace battery cover. Upon reset, Master Code creation is the only option PIN available and must be performed prior to any other programming of the lock.