Skip to main content
Knowledge Base

Kwikset 910 Deadbolt (SmartCode Deadbolt 99100) - Battery Replacement

  1. Last updated
  2. Save as PDF

The content on this page has been written by a third party and is not maintained by Alarm.com. 

Any questions regarding the installation, maintenance, and/or usage instructions in this guide should be directed to the device manufacturer.

To access the full installation guide, see Kwikset 910 Deadbolt (SmartCode Deadbolt 99100) - Installation Guide.

The Kwikset 910 Deadbolt requires four AA batteries.

Batteries and battery pack.png

To replace the batteries in a Kwikset 910 Deadbolt:

  1. Remove the lock cover.

    Remove cover.png
     
  2. Take out the battery pack.

    Remove battery pack.png
     
  3. Insert new AA batteries into the battery pack.

    Insert batteries into battery pack.png
     
  4. Slide the battery pack back into the lock panel.

    Insert battery pack.png
  5. Reinstall the lock cover.

    Reinstall cover.png