Kwikset 888 Touchpad Electronic Deadbolt (Smartcode Deadbolt 888)

Important: The product or feature described on this page is at end of life.

Device Image
Manufacturer	Kwikset
User Code Limit	30
Digits in User Code	4 to 8
S2	No
Keypad Layout	2 digits per button (touchscreen)
Auto Re-lock Option	Yes
Mate Button Location	The Z-Wave Mate button is the A button, which is found on the upper left side of the Interior panel after removing the cover.
Removable Z-Wave Card	No
Factory Reset Method	Remove battery pack. Press and hold the program button on the back of the lock while reinserting the battery pack. Continue to hold the program button until the lock sounds 1 long beep (this will take about 30 seconds). Release the program button. The lock will sound one long beep accompanied by a flashing red LED. This will be followed by three short beeps, then two long beeps and a quick flash of green LED. The lock has now been factory reset.
Handing Process	Handing process should happen automatically on this model when batteries first installed. If it fails, or is incorrect, follow factory reset instructions above.