What kind of rules can be set up with Z-Wave locks?

Event-triggered rules are:

1. A rule that will automate locks when the security system arming state is changed.
2. A rule that will automate the security system based on a change in a lock's status.
   • If setting the security system to disarm when the lock is unlocked, the lock must be unlocked locally by a user code for the automation rule to trigger and disarm the security system. 
      
     Important: With this specific rule, anyone with access to the selected lock will be able to disarm the security system simply by unlocking the lock using their lock user code, regardless of whether the user has been given security panel access.
      
3. A rule that will lock multiple locks when a single lock is locked. 
4. A rule that will unlock a single door when fire, smoke, or CO is detected or when a customer presses the fire panic button on the panel.

   • Fire-triggered unlocking rules are compatible with most Alarm.com-compatible security panels and Z-Wave locks. This feature is not compatible with 2GIG GC3 panels with firmware versions 3.2.0+ at this time.

     Important: If there is a manual auto-relock switch on the physical lock, verify it is switched to the off position.

5. A rule that will lock a single door after a specified delay from when the selected contact sensor is closed.

For information on how to set up event-triggered rules, see Create/edit an event-triggered lock automation rule.