Zipato RGWB Light Bulbs

Device Image
Manufacturer	Aeon Labs / Aeotec
Power Requirements	120 VAC (via light socket)
Power	Consumes 6.7W
Dimming	Yes
Color change	Yes
Troubleshooting Considerations	It is important that the switch controlling the light socket remain on in order to maintain power to the Z-Wave LED bulb. If the switch is turned off, then no power will be going to the bulb device and therefore no Z-Wave functionality will be available (control, repeating) The LED bulb acts as a repeater on the network, so turning off the switch to the Z-Wave LED bulb could also affect function of other devices on the network that use it as a repeater.
Z-Wave Security 2 (S2)	No
Z-Wave SmartStart	No
Z-Wave Enrollment	Turn on the bulb using the light or lamp switch. Place the Z-Wave controller into Add Mode. Tap the bulb until it changes from bright white to green. The bulb will change back to white when it has been added successfully

Device Image
Manufacturer	Aeon Labs / Aeotec
Power Requirements	120 V
Light Output	9.5 W
Dimming	Yes
Color Changing	Yes
Z-Wave Security 2 (S2)	No
Z-Wave SmartStart	No
Z-Wave Enrollment	Place the Z-Wave controller into Add Mode. Apply power to the RGBW Light Bulb to turn it ON. The bulb will flash once if it has been successfully enrolled.