Enroll, delete, or reset a Qolsys IQ SmartPlug (QZ2101-840)
The Qolsys IQ SmartPlug (QZ2101-840) can be enrolled into or deleted from a Z-Wave network following the instructions below.
For more information about installing a Qolsys IQ SmartPlug (QZ2101-840), see Qolsys IQ SmartPlug (QZ2101-840) - Quick Install Guide.
To enroll a Qolsys IQ SmartPlug (QZ2101-840)
- Plug in the Qolsys IQ SmartPlug (QZ2101-840).
- Place the Z-Wave controller into Add Mode.
- Press the button on the device three times within 1.5 seconds.
To delete a Qolsys IQ SmartPlug (QZ2101-840)
- Place the Z-Wave controller into Delete Mode.
- Press the button on the device three times within 1.5 seconds.
To reset a Qolsys IQ SmartPlug (QZ2101-840)
- Press and hold the button on the device for 10-15 seconds.