Leviton Plug-In Dimmer (DZPD3)

Device Image
Manufacturer	Leviton
Maximum Loads for Z-Wave Outlet	120VAC 60Hz, Resistive, 1800W, 15A, Incandescent, 1800W, 15A LED/CFL; 5A, Fluorescent, 1800W, 15A, Inductive, 1800VA, 15A, Motor, 1/2HP, 9.8A
Maximum Load for Both Outlets	15 amps (1800 watts)
Dimming	Yes; Only on incandescent bulbs
Z-Wave Security 2 (S2)	No
Z-Wave SmartStart	No
Z-Wave Enrollment	Enter programming mode by holding the top of the paddle for 7 seconds. The Locator LED will blink amber. Follow directions in the Z-Wave controller to enter learn mode. Tap the top of the paddle one time. The Locator LED will quickly flash green. The Z-Wave controller will begin to pair with the Leviton switch. Upon successful addition to the network, the LED will turn off and then blink green three times. If the adding process is not successful, the LED will flash red three times. Note: This device also supports NWI (Network Wide Inclusion). Use a single-tap of the top of the paddle when the panel is in Add Mode to utilize NWI.