Jasco Z-Wave In-Wall Wireless Smart Switch (14318)

Device Image
Manufacturer	Jasco / GE
Power Requirements	120 VAC, 60 Hz
Maximum Load	960W, incandescent, ½ HP Motor; or 1800W (15A) Resistive
Dimming	No
Z-Wave Security 2 (S2)	No
Z-Wave SmartStart	No
Add mode	Place the Z-Wave controller into Add Mode. Press and release either the top or bottom of the switch rocker. Verify that the device shows up on the Alarm.com customer website or Alarm.com app and responds to commands to turn the device on/off.