Enroll, delete, or reset a Jasco Plug-in Wireless Smart Dimmer 28166/28170 (ZW3104)
The Jasco Plug-in Wireless Smart Dimmer 28166 (ZW3104) can be enrolled into or deleted from a Z-Wave network following the instructions below.
For more information about installing a Jasco Plug-in Wireless Smart Dimmer 28166 (ZW3104), see Jasco Plug-in Wireless Smart Dimmer 28166 (ZW3104) - Installation Guide.
To enroll a Jasco Plug-in Wireless Smart Dimmer into a Z-Wave network:
- Place the Z-Wave controller into Add Mode.
- Press and release the manual/program button.
- Verify that the device shows up on Alarm.com customer website or Alarm.com app and responds to commands to turn the device on/off.
To delete a Jasco Plug-in Wireless Smart Dimmer from a Z-Wave network:
- Place the Z-Wave controller into Delete Mode.
- Press and release the manual/program button.
To reset a Jasco Plug-in Wireless Smart Dimmer:
- Unplug the device.
- Press and hold the manual/program button for at least 3 seconds.
- Apply power to the device. Continue to hold the button for at least 3 seconds.