Jasco Plug-in Outdoor Smart Switch 14311 (ZW4201)

Device Image
Manufacturer	Jasco
Power Requirements	120 VAC, 60 Hz
Maximum Load	600W Incandescent, ½ HP Motor or 1800W Resistive
Dimming	No
Z-Wave Security 2 (S2)	No
Z-Wave SmartStart	No
Z-Wave Enrollment	Place the Z-Wave controller into Add Mode. Apply power to the device. Press and release the manual/program button. Verify that the device shows up on Alarm.com customer website or Alarm.com app and responds to commands to turn the device on/off.