Enroll, delete, or reset a Jasco In-Wall Smart Toggle Dimmer (14322/14296/14295/ZW3004)
The Jasco In-Wall Smart Toggle Dimmer (14322/14296/14295/ZW3004) can be enrolled into or deleted from a Z-Wave network following the instructions below.
For more information about installing a Jasco In-Wall Smart Toggle Dimmer (14322/14296/14295/ZW3004), see Jasco In-Wall Smart Toggle Dimmer (14322/14296/14295/ZW3004) - Quick Start Guide.
To enroll a Jasco In-Wall Smart Toggle Dimmer into a Z-Wave network:
- Place the Z-Wave controller into Add Mode.
- Press up on the toggle switch and release.
- Verify that the device shows up on Alarm.com customer website or Alarm.com app and responds to commands to turn the device on/off.
To delete a Jasco In-Wall Smart Toggle Dimmer from a Z-Wave network:
- Place the Z-Wave controller into Delete Mode.
- Press up on the toggle switch and release.
To reset a Jasco In-Wall Smart Toggle Dimmer:
- Quickly press up on the switch toggle three times, then immediately press down on the switch toggle three times.
- There will be no indication from the switch that a successful reset has occurred.