Jasco Enbrighten Smart A19 LED Bulb (39723)

Device Image
Manufacturer	Jasco / GE
Power Requirements	120V, 60Hz, 80mA
Power	Consumes 9W
Light Output	750 Lumens (60W incandescent equivalent)
Bulb Lifetime	25,000 hours (equivalent 22.8 years based on 3 hours/day)
Dimming	Yes
Troubleshooting Considerations	It is important that the switch controlling the light socket remain on in order to maintain power to the Z-Wave LED bulb. If the switch is turned off, then no power will be going to the bulb device and therefore no Z-Wave functionality will be available (control, repeating) The LED bulb acts as a repeater on the network, so turning off the switch to the Z-Wave LED bulb could also affect function of other devices on the network that use it as a repeater.
Z-Wave Security 2 (S2)	No
Z-Wave SmartStart	No
Z-Wave Enrollment	Place the Z-Wave controller into Add Mode. Power on the Embrighten LED Smart Bulb. The Enbrighten LED Smart Bulb will be automatically added into your network within 30 seconds, and the smart bulb will flash 2 times to signify successful addition into the network.