Jasco Enbrighten LED Bulb (52190 or ZW7105)

Device Image
Manufacturer	Jasco
Power Requirements	120VAC, 60Hz, 9W
Light Output	750 lumens (equivalent to 60W incandescent bulb)
Dimming	Yes
Color Changing	No
Z-Wave Security 2 (S2)	Yes
Z-Wave SmartStart	Yes
Z-Wave Enrollment	If the Z-Wave controller is not SmartStart or S2-compatible, this device can be enrolled in the traditional way as an S0 device. Place the Z-Wave controller into Add Mode. The bulb defaults to SmartStart inclusion mode. To switch to S2 or non-secure enrollment, turn the bulb off and on three times, ending in on mode. The bulb will flash four times to indicate it is now in classic learn mode. The bulb will flash twice to indicate that it was added to the network. If the bulb is not added after 10 seconds, power the bulb off and on once to re-trigger it.