Hank RGB Bulb (HKZW-RGB01)

Device Image
Manufacturer	Hank
Power Requirements	100-240 VAC +/- 10%, 50/60 Hz
Light Output	7 W
Dimming	Yes
Color Changing	Yes
Z-Wave Security 2 (S2)	No
Z-Wave SmartStart	No
Z-Wave Enrollment	Ensure that the RGB Bulb is disconnected from power. Place the Z-Wave controller into Add Mode. Apply power to the RGB Bulb. If enrollment is successful, RGB Bulb will blink fast in blue for less than 5 seconds, then go to a solid blue color for 3 seconds. Verify that the RGB Bulb shows up on the Alarm.com customer website and Alarm.com app and responds to commands to turn the RGB Bulb on/off.