GoControl Z-Wave 3-Way Wall Mount Accessory Dimmer Switch (WT00Z5-1)

Device Image
Manufacturer	Nice North America, LLC
Power Requirements	120 VAC, 60 Hz
Maximum Load	None
Dimming	Yes
Z-Wave Security 2 (S2)	No
Z-Wave SmartStart	No
Z-Wave Enrollment	Place the Z-Wave controller into Add Mode. Tap the switch. The LED will blink slowly when in ADD Mode. You should see an indication on your Controller that the device was added to the network and the LED will stop blinking. The device will appear in the list of Switches. It should display as a switch.