GoControl Smart LED Light Bulb (LB60Z-1)

Device Image
Manufacturer	Domitech (re-branded for Linear)
Power Requirements	120 VAC (via light socket)
Power	Consumes 9W
Light Output	750 Lumens (60W incandescent equivalent)
Bulb Lifetime	25,000 hours (equivalent 22.8 years based on 3 hours/day)
Dimming	Yes
Color Change	No
Troubleshooting Considerations	It is important that the switch controlling the light socket remain on in order to maintain power to the Z-Wave LED bulb. If the switch is turned off, then no power will be going to the bulb device and therefore no Z-Wave functionality will be available (control, repeating) The LED bulb acts as a repeater on the network, so turning off the switch to the Z-Wave LED bulb could also affect function of other devices on the network that use it as a repeater.
Z-Wave Security 2 (S2)	No
Z-Wave SmartStart	No
Z-Wave Enrollment	Place the Z-Wave controller into Add Mode. Turn the power to the light bulb socket ON. The Smart LED Light Bulb will flash twice. The device will appear in the list of Switches. It should display as a multi-level switch.