GoControl Plug-in Lamp Module (PD300EMZ5-1 or Linear PD300Z-2)

Device Image
Manufacturer	Nice North America, LLC
Maximum Loads for Z-Wave Outlet	300 W, for incandescent lamps only
Maximum Load for Both Outlets	15 amps (1800 watts)
Dimming	Yes; Only on incandescent bulbs
Z-Wave Security 2 (S2)	No
Z-Wave SmartStart	No
Z-Wave Enrollment	Place the Z-Wave controller into Add Mode. The PD300Z-2 must be in its permanently installed location. For NWI Inclusion, press the button on the PD300Z-2 once. For classic inclusion, press the button on the PD300Z-2 twice. You should see an indication on your Controller that the DEVICE WAS INCLUDED in the network.