Alarm.com Image Sensor Version 3 (ADC-IS-300-LP) - Data Sheet
The Image Sensor (model ADC-IS-300-LP) delivers smarter security with instant visual verification of alarms and increased engagement through on-demand views. Our latest model* has been redesigned to deliver higher resolution images, improved night vision, and a wider field of view.
It is ETL certified, battery operated, and communicates with the customer’s security control panel. Swap it for a standard motion sensor in typical installations for increased customer value and higher account RMR.
Integrated with Alarm.com Interactive Services, images are easily accessible to customers. All uploaded images are viewable on the Alarm.com Customer Website or through the mobile apps. Users can even receive images in text or email alerts whenever an image is uploaded— whether in the event of an alarm, or on-demand for important events.
The Image Sensor is compatible with most Alarm.com supported panels. Some panels require additional hardware. See the System Compatibility table for more details. For more information on finding out whether or not the Image Sensor radio is built into the module, see Verify information for an Alarm.com cellular module.
Highlighted features
- ETL certified for UL639 and ULC S306
- 35 foot detection range with a 90 degree horizontal FOV
- Remotely configurable PIR sensitivity
- Pet immunity, etc.
- Easy installation
- Simple panel enrollment
- No broadband required; No router configuration
- Tri-color LED
- Battery powered
- Tamper detection, walk test mode, supervision
- Color images
- Night vision
- IR illumination
- Black and white images
- Wireless image transmission to panel
- Wireless image transmission to Alarm.com via cellular networks
Physical data
| Dimensions (L x W x H) | 3.0” by 1.8” by 1.8” |
|---|---|
| Enclosure Material | Fire resistant plastic (UL 94) |
| Enclosure Color | White |
| Weight | 3.1 oz (with batteries, w/o mounting accessories) |
| Operating Temperature | Indoors (32-110°F for non pet applications; 60-110°F for pet applications) |
| Humidity | UL certified in up to 85% relative humidity |
| Static Immunity | Yes |
| Sealed Optics | No |
| RFI Immunity | Yes |
| Tamper Detection | Yes (orientation based detection) |
Motion detection
| Technology | Dual element PIR |
|---|---|
| Detection Range | 35’ with a 90° horizontal FOV |
| Lens Type | Fresnel lens |
| PIR Sensitivity | Remotely configurable; 3 levels |
| Pet Immunity | Yes with low sensitivity level only (up to 40 lbs) |
| PIR White Light Immunity | Yes |
| Walk Test Mode | Yes |
| Post Activation Idle Time | 3 minutes (default when disarmed) |
Figure 1. Side View: PIR Lens Coverage
Figure 2. Top View PIR Lens Coverage
Camera
| Camera Type | CMOS |
|---|---|
| Focus | 1 ft. to infinity |
| Night Vision and Capture | Yes- automatic infrared flash (invisible 240mW) |
| Night Vision Range | Optimal within 20 feet |
| Minimum Illumination w/o IR Flash | 3 lux |
| Motion Triggered Images | Yes |
| Images On-Demand | Yes |
| Image Resolution | VGA (640x480 pixels) |
Installation
| Mounting Height | 6 ft to 8 ft |
|---|---|
| Mounting Angle | 6°, 12°, or 18° down angle |
| Mounting Options | Wall mounted w/ bracket (flat or corner mount) |
Wireless
| Frequency | 900 MHz |
|---|---|
| Protocol | 802.15.4 |
| Open Air Range | 400 feet |
| Antenna | Helical chip antenna |
| Wireless Supervision | Yes |
| Encryption | Yes |
Regulatory compliance
| FCC | FCC ID: YL6-143IS300 |
|---|---|
| IC | IC: 9111A-143IS300 |
| RoHS | Compliant |
| ETL | Certified for UL 639 compliance |
Electrical data
| Operating Voltage | 2.3-3.5v |
|---|---|
| Current Consumption (typical) | <1mA |
| Power Requirements | 2-AA 1.5v Lithium batteries |
| Recommended Battery | Energizer Ultimate Lithium (included) |
| Battery Life (typical) | Approximately 3 years |
System compatibility
Image Sensor service package add-ons