2GIG GoControl Image Sensor ADC-IS-220-GC - Data Sheet
The Image Sensor (model ADC-IS-220-GC) is compatible with the 2GIG GoControl panel with firmware 1.10+. A cell radio and a 900 MgHz XCVR2 transceiver are required.
The Image Sensor is a breakthrough new product that combines a PIR (Passive Infrared) motion sensor, an integrated still camera, completely wireless communication, and Alarm.com Interactive Services. The Alarm.com Image Sensor offers an entirely new service to the customer designed to deliver better security through visual verification of alarms and increased engagement through on-demand property views.
It is ETL certified, battery-operated, and communicates with the customer’s security control panel. Swap it for a standard motion sensor in typical installations for increased end-user value, and higher account RMR.
Integrated with Alarm.com Interactive Services, images are easily accessible to customers. All uploaded images are viewable on the Alarm.com Alarm.com customer website or Alarm.com app. Users can even receive images in text or email alerts whenever an image is uploaded—whether in the event of an alarm, or on-demand for important events.
Highlighted features
- ETL certified for UL 639
- 35 feet by 40 feet detection coverage area
- Remotely configurable PIR sensitivity
- Pet immunity, etc.
- Easy installation
- Simple panel enrollment
- No broadband required or specific router configuration
- Tamper detection, walk test mode, supervision
- Color images
- Night vision
- IR illumination
- Black and white images
- Wireless image transmission to panel
- Wireless image transmission to Alarm.com via cellular networks
Physical data
|
Dimensions (L x W x H) |
3.0” by 1.8” by 1.8” |
|---|---|
|
Enclosure Material |
Fire resistant plastic (UL 94) |
|
Enclosure Color |
White |
|
Weight |
3.1 oz (with batteries, w/o mounting accessories) |
|
Operating Temperature |
Indoors (32-110°F for non pet applications; 60-110°F for pet applications) |
|
Humidity |
UL certified in up to 85% relative humidity |
|
Static Immunity |
Yes |
|
Sealed Optics |
No |
|
RFI Immunity |
Yes |
|
Tamper Detection |
Yes (orientation based detection) |
Motion detection
|
Technology |
Dual element PIR |
|---|---|
|
Detection Range |
35’ x 40’ |
|
Lens Type |
Fresnel lens |
|
PIR Sensitivity |
Remotely configurable; 3 levels |
|
Pet Immunity |
Yes with low sensitivity level only (up to 40 lbs) |
|
PIR White Light Immunity |
Yes |
|
Walk Test Mode |
Yes |
|
Post Activation Idle Time |
3 minutes (default when disarmed) |
Figure 1. Side View: PIR Lens Coverage
Figure 2. Top View PIR Lens Coverage
Camera
|
Camera Type |
CMOS |
|---|---|
|
Focus |
1 ft. to infinity |
|
Night Vision and Capture |
Yes- automatic infrared flash (invisible 240mW) |
|
Night Vision Range |
Optimal within 15 feet |
|
Minimum Illumination w/o IR Flash |
3 lux |
|
Motion Triggered Images |
Yes |
|
Images On-Demand |
Yes |
|
Image Resolution |
QVGA |
Installation
|
Mounting Height |
8 feet |
|---|---|
|
Mounting Angle |
6°, 12°, or 18° down angle |
|
Mounting Options |
Wall mounted w/ bracket (flat or corner mount) |
Wireless
|
Frequency |
900 MHz |
|---|---|
|
Protocol |
Proprietary, FHSS |
|
Open Air Range |
550 feet |
|
Antenna |
Helical chip antenna |
|
Wireless Supervision |
Yes |
Regulatory compliance
|
FCC |
FCC ID: YL6-143220ISGC |
|---|---|
|
IC |
IC: 9111A-143220ISGC |
|
RoHS |
Compliant |
|
ETL |
Certified for UL 639 compliance |
Electrical data
|
Operating Voltage |
1.8v - 3.5v |
|---|---|
|
Current Consumption (typical) |
<1mA |
|
Power Requirements |
2-AA 1.5v Lithium batteries |
|
Recommended Battery |
Energizer Ultimate Lithium (included) |
|
Battery Life (typical) |
Approximately 2 years |
System compatibility
|
Control Panel |
2GIG GoControl with firmware version 1.10+ |
|---|---|
|
Required Radio |
900 MgHz XCVR2 transceiver (2GIG-XCVR2-345) The connected transceiver information displays in Daughterboard in the customer's Panel Information. For more information about remotely verifying the transceiver connected, see Verify which radios are built-in to an Alarm.com module. |
|
Device Limit |
Up to three Image Sensors can be added per system (one zone per Image Sensor installed) |
Image Sensor service package add-ons