Image Sensor - LED guide
LED pattern for Image Sensor version 1 and 2
The following table applies to Image Sensor models version 1 (i.e., ADC-IS-100-LP and ADC-IS-GC) and version 2 (i.e., ADC-IS-200-LP, ADC-IS-221-LP, ADC-IS-200-GC, and ADC-IS-220-GC).
If the Image Sensor’s red status LED is blinking, refer to the following table for troubleshooting diagnostics.
LED description
| LED Pattern | Device Status or Error | Duration of LED Pattern |
|---|---|---|
|
Solid for 5 Seconds |
Sensor Power-Up |
Approximately first 5 seconds after powering. |
|
Fast Blink for 5 Seconds at a Time |
Searching for Network to Join |
Repeats pattern for up to 60 seconds after powering until the sensor enrolls in a network. |
|
Solid for 5 Seconds |
Sensor Joins or Rejoins Network |
First 5 seconds after sensor joins a new network (during enroll process) or rejoins its existing network. |
|
Solid for 3 Seconds at a Time |
Motion Test Mode
|
Repeats for each motion activation during the 3 minutes after the sensor joins the network, has been tampered, or is placed in PIR test mode. Note: In test mode, there is an 8-second sleep timeout between motion trips. |
|
Slow Blink for 5 Seconds at a Time |
Attempting to Rejoin Network |
Repeats pattern for up to 60 seconds after power cycle until the sensor reconnects to its network. Note: This means the sensor has already been enrolled in a network and is trying to connect to it. If attempting to enroll the sensor in a new network, hold the reset button for a full 10 seconds (until LED blinks rapidly) to clear the old network before adding to a new network. |
|
Fast Blink for 1 Second at a Time |
Network |
Pattern begins after 60 seconds of searching for (and not joining) a network and repeats until RF communication is restored. Pattern persists if the sensor is not enrolled in a network or cannot connect to the current network. |
LED pattern for Image Sensor version 3
Refer to the following guide and chart to understand the camera LED patterns for the Image Sensor version 3 (ADC-IS-300-LP).
LED description
| Status | Description | Duration |
|---|---|---|
|
Blinking Red Sensor Power Up |
~3 seconds |
|
|
Solid Red Memory Check |
~10 seconds |
|
|
Blinking Yellow Searching for Unknown Network |
~2 minutes |
|
|
Blinking Green Searching for Known Network |
~2 minutes |
|
|
Intermittent Rapid Blinking Red Network Connectivity Error See Troubleshooting. |
Continuous |
|
|
Solid Yellow Sensor Found Network |
~5 seconds |
|
|
Blinking Yellow & Green Syncing |
Up to 5 minutes |
|
|
Solid Green Connected and Synced |
~5 seconds |
LED pattern key
|
Solid |
Blinking |
Multi-color Blinking |
Rapid Blink |