Smart Gateway
With a reliable wireless connection and excellent range, the ADC-SG130 makes it easy to install any Alarm.com Wi-Fi camera. The ADC-SG130 features WPS, eliminating the need to update cameras with complicated router passwords. Simply plug the ADC-SG130 into any wall outlet, connect to the existing router, pair with a Wi-Fi camera, and enjoy instant, secure connectivity.
Features
- Wi-Fi Access Point (2.4 GHz)
- Reliable network for Alarm.com Wi-Fi cameras, ensuring cameras stay connected when the home's network SSID, password, or ISP changes
- Remote management and troubleshooting
- Enhanced customer experience
In the box
- ADC-SG130 Smart Gateway
- Power Adapter
- Ethernet cable
- Quick Installation guide
Specifications
| Ethernet connection |
10/100 Mbps (FAST) WAN connection |
| Wi-Fi connection |
802.11 b/g/n, 2.4 GHz |
| Dimensions without plug (H x W x D) |
3.5 x 3.1 x 1.2" (11.6 x 8.0 x 3.1 cm)
|
| LED indicators |
4 |
| Buttons |
Function, WPS, Reset |
| Operating temperature |
32°F – 104°F (0°C – 40°C) |
| Operating humidity |
0 – 80% (non-condensing) RH |
LED guide
Power 
| LED status |
Description |
| On |
Device is powered on |
| Off |
Device is powered off |
| Flashing |
Device is booting |
Data/Ethernet 
| LED status |
Description |
| On/Flashing |
Device transferring/receiving data over Ethernet. |
| Off |
No data is being transferred over Ethernet. Please check the Ethernet connection between the Smart Gateway and the router. |
Communication 
| LED status |
Description |
| On |
Connected to Internet |
| Off |
No local or Internet connection. See Troubleshooting. |
| Flashing (slowly) |
Local connection, no Internet |
| Flashing (five quick blinks) |
Communication test initiated |
Wi-Fi 
| LED Status |
Description |
| On |
Active |
| Off |
Inactive |
| Flashing |
WPS mode |
Additional states
| LED status |
Description |
| All LEDs flashing (escalating) |
Firmware upgrade in progress |
| All LEDs flashing (simultaneously) |
Reset in progress |
DHCP range
The ADC-W115C, ADC-SG130, ADC-NK-200T-A-CC2, and IQ WiFi 6 devices automatically create their own DHCP assignment range as shown in the table below.
Devices that are connected downstream from the DHCP server will be automatically assigned an IP address within that network (e.g., 192.168.73.X for the ADC-W115C).
Note: The ADC-W100, ADC-W110, and ADC-W114C do not create their own DHCP range for device management.
| Access point, chime, or gateway model |
DHCP range |
| ADC-W115C |
192.168.73.X |
| ADC-SG130 |
192.168.100.X |
| ADC-NK-200T-A-CC2 |
10.0.0.X |
| IQ WiFi 6 |
192.168.105.X |
