Skip to main content
Knowledge Base

LP1502 Door Controller (ADC-AC-LP1502) is showing tamper

  1. Last updated
  2. Save as PDF

If the LP1502 Door Controller (ADC-AC-LP1502) is showing tamper: 

  1. Verify the enclosure cabinet is closed. 
  2. Verify that TMP and GND on TB1 are wired to an enclosure's tamper switch, or place a jumper wire between TMP and GND to close the loop.

Note: If the tamper remains, manually press the switch to see if tamper clears. If it does, loosen the screw to allow the switch to be pressed in further.

acc234_tmp.PNG

sp; `; const shareLink = document.createElement('li'); shareLink.classList.add('share-link'); shareLink.innerHTML = buttonMarkup; shareLink.addEventListener('click', copyLocation); elmMetaTop.appendChild(shareLink); } if (location.pathname.startsWith('/Customer')) window.addEventListener('DOMContentLoaded', createShareButton);