X1100 Four Door Controller and Power Kit (ADC-AC-X1100-4PSE) - Data Sheet

Last updated
Save as PDF

Overview

Alarm.com’s Smarter Access Control is a powerful, easy-to-use solution for commercial properties that seamlessly integrates with the Alarm.com for Business platform. This platform enables intelligent automation and features, such as disarming when badging in, locking doors when arming, and tagging access events on the video timeline.

The X1100 Four Door Controller and Power Kit comes with an X1100 Door Controller and an X100 Two Reader Expansion Module pre-wired to a 12/24 VDC dual-voltage power supply. Installation is easy with this self-contained kit that can provide power for a complete 3- or 4-door access control system.

X1100 Two Door Controller and Power Kit (ADC-AC-X1100-2PSE).png

Features

Four reader inputs
Eight relay outputs
Eight programmable inputs
Pre-assembled to fully power a 3- or 4-door system

Benefits

Scan-to-add card format and serial detection
Control doors and manage users from the Alarm.com Alarm.com app
User-friendly, flexible scheduling
Configure hardware using web or app for easy installation
Plug & play installation — no networking expertise required

Power supply specifications

Input Voltage	120 / 208 / 230V AC 50/60 Hz
Main Outputs	2A @ 12 VDC 2A @ 24 VDC
Auxiliary Output	1.5 A Class II power limited
F8P Distributed Outputs	2 A Class II power limited
Battery Charge Current	0.7 or 1.60A Selectable
System BTU/Hour	34 @ 12V, 41 @ 24V
Efficiency	85% 120V AC 60 Hz In, Full Load
Certifications	UL294, UL603, UL1076 ULC S318, S319, CSA C22.2#107.1 CSA 22.2 #60950 RoHS Lead free CE Approved
Operating Temperature	-4°F - 122°F (-20°C - 50°C)

Door Controller specifications

Important: The interface is for use in low-voltage, Class 2 circuits only. The installation of this device must comply with all local fire and electrical codes.

Input Power	12 to 24 VDC ±10%, 550 mA max excluding reader voltage
Reader Power	12 VDC ±10%, 500 mA max allowed each reader Note: Power is automatically regulated to 12 VDC.
Communication	Shielded 2-Wire RS-485
Inputs	Two dedicated reader inputs Four programmable inputs One dedicated input for each of the following: Tamper, AC Fail, and Battery Fail
Outputs	Four relay outputs 5 A (NO) and 3 A (NC) @ 30 VDC Two-wire LED control Single-wire buzzer output
Certifications	FCC, CE, UL 294 Certified
Dimensions (W x L x H)	6.46" x 5.51" x 1.02” (16.4 cm x 14 cm x 2.6 cm)
Temperature	32°F - 158°F (0°C - 70°C) operational -67°F - 185°F (-55 - 85°C) storage
Operating Humidity	5-85% (non-condensing) RH
Availability	Distribution

Kit specifications

Dimensions	20" x 16" x 4.5" (50.8 cm x 40.64 cm x 11.43 cm)
Weight	20 lbs. (9.1 kg)
Conduit Knockouts	1/2" (15mm) and 1 1/4" (32mm)