Which types of Access Control locking hardware are compatible?
The Door Controller (ADC-ACC1-17), LP1501 PoE Door Controller (ADC-AC-LP1501), LP1502 Door Controller (ADC-AC-LP1502), as well as the Single and Two Reader Expansion Modules, are compatible with most standard 12 or 24V locking hardware. This includes but is not limited to magnetic locks, electrified door strikes, and electrified locksets.
Power ratings
The following lists the specific output relay power ratings for the controller and expansion boards.
ADC-ACC1-17
- Relay 1: Form-C, 2A @ 30Vdc
- Relay 2: Form-C, 2A @ 30Vdc
ADC-AC-LP1501
- Relay 1: Form-C, 2A @ 30Vdc
- Relay 2: Form-C, 2A @ 30Vdc
ADC-AC-LP1502
- Relay 1-4: 5A (NO) and 3A (NC) @ 30 VDC
ADC-ACX1/ADC-AC-MR50
- Relay 1: Form-C, 5A @ 30Vdc
- Relay 2: Form-C, 1A @ 30Vdc
ADC-ACX2/ADC-AC-MR52
- Relay 1-6: Form-C, 5A @ 28Vdc
Recommended hardware
The following lists the recommended locking hardware to use with Alarm.com Access Control. For a full list of all recommended hardware for Access Control, see Smarter Access Control recommended hardware.
Note: This is a small subset of what is compatible with Alarm.com Smarter Access Control and is not sold by Alarm.com. Contact your distribution partner for availability and pricing.
Strikes
|
RIM STRIKE Make: HES |
ELECTRONIC STRIKE Make: HES |
ELECTRONIC STRIKE Make: HES |
Mag lock
|
600LB MAG LOCK Make: Alarm Controls |
1200LB MAG LOCK Make: Alarm Controls |
Incompatible locks
At this time, wireless lock and keypads have not been tested or certified as being compatible with the Alarm.com solution. Therefore, compatibility cannot be guaranteed for any of these wireless devices. The use of a wireless keypad or lock device may cause unexpected behavior.